KEYENCE KV Series - Manual (Page 98)

Chapter 2 Editor
2-74
2
2.11.2 Entering and developing macros
Edit ➔ Macro Input ➔ Develop (Shift + F1)
To use a macro, macro instructions must be entered.
1. Open the macro file in which the macro to be entered is saved.
Specify frequently used macros for the auto file read function.
2. Set the ladder program window to which the macro is entered as the current
window.
3. Select "Macro Input → Develop" from the "Edit" menu.
The "Macro Input" dialog box is displayed.
4. Select the name of the macro to be entered in the "Macro Name" text box.
The macro name described in the macro start declaration line is displayed here.
5. Enter macro operands to "@0", "@1" . . .
You can enter as many macro operands as the number specified as the argu-
ments in the macro file.
The comment described in the macro start declaration line is displayed in the
"Comment" column.
6. When input is complete, click the [OK] button.
To cancel input, click the [Cancel] button.
The macro is entered.
Note: Macros that have been changed cannot be returned to their original state.
KVSKA Chap 02.P65 08.3.11, 11:28 AM 74