KEYENCE KV Series - Manual (Page 155)

Chapter 3 Simulator
2-131
1 3
3.5.7 Printing out the registration monitor
The contents of the registration monitor can be printed out. This section describes
the printout procedure.
Only the registration monitor can be printed out.
First select the registration monitor to be printed out as the current window.
Note: Before performing a printout, confirm the following.
• The printer should be correctly connected.
• The printer should be correctly set by selecting "Printer Setup" from the "File"
menu.
If the printer is not correctly set, correct the settings according to the requirements
for your printer.
Preview display
File ➔ Print Preview
To confirm the contents to be printed out on the preview screen, perform the follow-
ing procedure.
1. Select the registration monitor to be printed out as the current window.
2. Select "Print Preview" from the "File" menu.
• The image that will be printed out is displayed on the screen.
• The [Print] button on the screen can be clicked to print out the image displayed.
KVSKA Chap 03.P65 08.3.11, 11:30 AM 131