KEYENCE KV Series - Manual (Page 32)

Chapter 1 Introduction
2-8
1
1.3.1 Differences from the KV IncrediWare (DOS)
Because the Ladder Builder for KV is a Windows application, its specifications are
slightly different from the KV IncrediWare (DOS) for MS-DOS, as listed below.
• Some of the keys assigned to keyboard functions are different.
➮ Refer to “Appendix G Quick Reference” on page 2-180.
• The timing chart simulator and the timing chart monitor are provided as the
registration monitor screen.
• The function to set the trigger on the timing chart monitor is not provided.
• The memory card operation function is not provided.
• The timing chart save/read function is not provided.
• The "extended ladder ➞ normal ladder" conversion function is not provided.
1.3.2 Differences from the Ladder Builder for KV Ver 1.0
From the Ladder Builder for KV Ver 1.5, the following changes and additions were
made to the specifications and functions.
• The editor function allows the selection to show/hide contact comments.
• You can edit ladder diagrams while checking the use status list of devices on the
monitor.
• The operation of switching the numbering system between decimal (#) and
hexadecimal ($) is assigned to shortcut key [Ctrl]+[E].
• The Visual KV Series units are newly supported.
KVSKA Chap 01.P65 08.3.11, 11:27 AM 8