KEYENCE KV Series - Manual (Page 87)

Chapter 2 Editor
2-63
1 2
2.7.3 Searching for the device at the cursor position
Edit ➔ Find Device at Cursor Position in Ladder ➔ Search Backward (U) (F2)
➔ Search Forward (F3)
➔ Search for OUT Backward (Shift + F2)
➔ Search for OUT Forward (Shift + F3)
To search for the device equivalent to the device at the current cursor position,
perform the following procedure.
1. Place the cursor in the device to be found.
2. Select "Find Device at Cursor Position in Ladder" from the "Edit" menu.
3. Select the search direction.
Search Backward : Searches backward from the current cursor position.
Search Forward : Searches forward from the current cursor position.
Search for OUT Backward : Searches for OUT backward from the current cursor
position.
Search for OUT Forward : Searches for OUT forward from the current cursor
position.
4. Search is started, and the first device found is displayed.
5. When searching continuously, repeat steps 2 to 4 above.
KVSKA Chap 02.P65 08.3.11, 11:28 AM 63