KEYENCE KV Series - Manual (Page 140)

Chapter 3 Simulator
2-116
3
2. Set the device to be registered using the dialog bar.
➮ For items, contents and precautions on changing settings, refer to "Changing the current value/preset
value/attribute" on page 2-96.
3. Click the [Register] button.
• The device satisfying the contents set is registered to each monitor.
■ To cancel the setting entered
Click the [Cancel] button.
3.4.5 Selecting and changing devices
Devices can be selected on the monitor all window, and then the ON/OFF status
and the current value of bit devices can be changed.
Selecting devices
To select a device, perform the following procedure.
■ Selecting a device using the mouse
Place the cursor over the device to be selected, and click it.
• The cursor changes to gray to indicate that the device is selected.
■ Selecting a device using the keyboard
When the cursor color is the same as the title bar color, place the cursor in the
device to be selected using the UP and DOWN keys, and press the ENTER key.
• The cursor changes to gray to indicate that the device is selected.
Comment
Preset value write button
Radix Current value write button
Preset value write box
Current value write box
Status in which a device is selected
KVSKA Chap 03.P65 08.3.11, 11:29 AM 116