KEYENCE KV Series - Manual (Page 65)

Chapter 2 Editor
2-41
1 2
Entering symbols directly
Edit ➔ Symbol Input ➔ Symbol Direct Input (Enter)
Instruction words can also be directly entered.
When you are familiar with creation of ladder programs and handling of instruction
words, direct input is recommended because it is quicker and more efficient than
input through the "Enter Instruction Word" window.
To open the dialog box for directly entering instruction words, select "Edit", "Symbol
Input" and "Direct Symbol Input" from the menu. The following two methods are also
available for quicker operation.
Select the desired cell using the LEFT, RIGHT, UP and DOWN keys, and then enter
the first character of the instruction word to be entered. You can also press the
ENTER key when changing an existing input.
The dialog box is opened in which the first character is displayed.
Example
When "A" is entered
■ Entering symbols in the direct input dialog box
1. Enter an instruction word directly from the keyboard into the text box.
Note 1: Enter an instruction word in mnemonic format, and enter a space between
the instruction word and the device name.
LD 0001
Note 2: For LD and LDB, "A" and "B" can be entered instead respectively.
LD 0001 → A 0001
LDB 0001 → B 0001
2. When input is complete, click the [OK] or [Ins] button.
[OK] : Overwrites the existing ladder symbol.
[Ins] : Inserts the ladder symbol entered in the cursor position.
[Cancel] : Cancels the setting entered, and closes the window.
3. The ladder symbol is entered.
→
KVSKA Chap 02.P65 08.3.11, 11:28 AM 41