KEYENCE KV Series - Manual (Page 147)

Chapter 3 Simulator
2-123
1 3
3.5.5 Selecting and changing devices
Devices can be selected on the registration monitor window, and then the ON/OFF
status and the current value of bit devices can be changed.
Note: Devices must first be registered before using the registration monitor.
The device registration procedure is described in "3.5.2 Displaying, saving, and
reading the registration monitor" (
➮ p. 2-118)
Selecting devices
To select a device, perform the following procedure.
■ Selecting a device using the mouse
Place the cursor over the device to be selected, and click it.
• The cursor changes to gray to indicate that the device is selected.
■ Selecting a device using the keyboard
When the cursor color is the same as the title bar color, place the cursor in the
device to be selected using the UP and DOWN keys, and press the ENTER key.
• The cursor changes to gray to indicate that the device is selected.
Status in which a device is selected
KVSKA Chap 03.P65 08.3.11, 11:29 AM 123