KEYENCE KV Series - Manual (Page 85)

Chapter 2 Editor
2-61
1 2
Jump to the next/previous block
Edit ➔ Jump ➔ Next Block (Ctrl + DOWN)
➔ Previous Block (Ctrl + UP)
To jump to the next circuit block or to the previous circuit block from the current
cursor position, perform the following procedure.
■ Jump to the next circuit block
•
Select "Edit", "Jump" and "Next Block" from the menu.
• Press the DOWN key while pressing and holding the Ctrl key.
Note: Jump from a comment line to the next circuit block is disabled.
■ Jump to the previous circuit block
•
Select "Edit", "Jump" and "Previous Block" from the menu.
• Press the UP key while pressing and holding the Ctrl key.
Jump to the beginning/end of the line
Edit ➔ Jump ➔ Beginning of Line (Home)
➔ End of Line (End)
To jump to the beginning or end of the line in which the cursor is currently placed,
perform the following procedure.
■ Jump to the beginning of a line
•
Select "Edit", "Jump" and "Beginning of Line" from the menu.
• Press the Home key.
■ Jump to the end of a line
•
Select "Edit", "Jump" and "End of Line" from the menu.
• Press the End key.
KVSKA Chap 02.P65 08.3.11, 11:28 AM 61