KEYENCE KV Series - Manual (Page 112)

Chapter 3 Simulator
2-88
3
3.2.2 Name and function of each part of the screen
When the simulator is started up, the ladder monitor window of the last edited ladder
program is displayed. If the monitor all window and registration monitor window were
previously displayed, they are also displayed when the simulator is started. In
addition, you can view the mnemonic list window and break condition window by
selecting them from the menu.
Sample screen
➮ The name and function of each part of each window are described on the pages listed below.
• Ladder monitor window p. 2-90
• Monitor all window p. 2-113
• Registration monitor window p. 2-122
Main window title bar
Displays the file name of the ladder
program currently being simulated.
Menu bar
Displays the menu to
execute commands.
Tool bar
Provides buttons to execute commands.
Only commonly used commands are
provided as buttons. Each command
can be executed by clicking the
corresponding button once.
Dialog bar
Allows you to register devices, assign device
values and preset values, and reset timers
and counters.
Main window
The entire simulator
screen.
Ladder monitor
window
➮ p. 2-90
Monitor all
window
➮ p. 2-113
Registration
monitor window
➮ p. 2-122
Status indication bar
Indicates the currently selected
function and the monitor’s
operating status.
KVSKA Chap 03.P65 08.3.11, 11:29 AM 88