Doepfer A-100(~ 40 MB) - Manual (Page 695)

DOEPFER System A-100 USB/Midi-to-CV/Gate A-190-4
7
• Hit the ” 2” button to leave the value level and the
return to the parameter level. Hit ” 2 “ once more to
return to the menue level (highest level).
Please note:
• Parameter changes will allways affect the
currently outputted CV / gate / clock signal
immediately. You are able to hear the changes.
• If you wish to keep your settings after
powering down your A-100 system, you have to
save your settings into the A-190-4’s non
volatile memory. This is done with the store
function covered later in this manual.
4.2. Menue and Parameter Overview
On the following two pages you will find an overview of all
available menues and their corresponding parameters: