Doepfer A-100(~ 40 MB) - Manual (Page 666)

A-190 MIDI-CV/SYNC Interface System A - 100 doepfer
12
RTRIG. TIME
This parameter sets the gate retrigger time - ie. the
time that elapses before another gate signal received
triggers the envelopes.
When setting this, always start with the shortest possi-
ble retrigger time (1 ms), and see if the connected
module (eg. an ADSR) triggers. If it doesn’t, slowly
increase RTRIG.TIME until the module does respond
to each new gate.
M M M M PROG CHANGE n
n : 0 ... 127 RTRIG.TIME = n x 1 ms
[m m m m Increase or decrease the time in 1ms steps
(0 to 255)
]
CV 2
Ú
SCALE
REF.NOTE
4 V
Config Menu 5 Retrig.
0