Doepfer A-100(~ 40 MB) - Manual (Page 543)

doepfer System A - 100 Dual Trigger Delay A-162
1
1. Introduction
Module A-162 (Dual Trigger Delay) contains two
separate delay circuits for trigger signals.
This module makes it possible to delay the onset of a
trigger pulse, and also change its length (see Fig. 1 on
page 3).
On each of the trigger delays, two controls can alter
the onset time and duration of triggers, from 0 up to
round about ten seconds. A control LED indicates the
onset and duration of the new trigger.
In
Control
Out
Len.
A-162
TDEL
Del.
In
Control
Out
Len.
Del.