Doepfer A-112 Sampler/Wavetable Oscillator - Manual

doepfer System A - 100 Sampler A-112
1
1. Introduction
Module A-112 (SAMPLER) is a combination module,
including a voltage controlled 8 bit Sampler and a
voltage controlled Wavetable Oscillator.
The module has the characteristic “grungy“ sound
of the early 8 bit Samplers and is a welcome addi-
tion to the A-100’s sound generating capabilities.
But it should not be compared with the polyphonic 16
bit MIDI samplers available on the market.
The module contains an A/D converter (ADC) for
recording the audio signal (8 bit resolution), digital
memory for storage of the the sampled signal, a D/A
converter (DAC) for playback and the control unit.
The memory is divided into two banks (S1, S2) with 64
kbyte each. In wavetable mode each bank is arranged
as 256 pages of 256 bytes.
The memory is non-volatile, i.e. after power-off the
sampling data in the memory is maintained.
Gate In
A-112
SAMPLER
Audio IN /
Wave-CV In
CV In
Audio Out
Modus
Man. Trig.
MIDI In
MIDI Out
Atten.
Tune
Run