Doepfer A-100(~ 40 MB) - Manual (Page 664)

A-190 MIDI-CV/SYNC Interface System A - 100 doepfer
10
CLOCK TIME
This parameter sets the amount by which the MIDI
clock is divided before being sent to the clock output
§
. (See ‘note length’ in the table below.)
MIDI Clock pulses are 1/96th Note. By setting the
amount by which the clock is divided, you can choose
different note lengths:
H You can also use the A-160 clock divider to
produce different divisions.
M M M M PROG CHANGE n
n : Divisor (1 ... 64)
on any MIDI channel
[m m m m
Increase or decrease the divisor
]
CLOCK POLARITY
This Parameter sets the polarity of the clock signals
at output §.
H For use just with the A-100, select "positive".
The negative setting is provided just for
connection to other synths that use a nega-
tive pulse.
M M M M positive : PROG CHANGE 65
negative : PROG CHANGE 66
Use any MIDI channel to make these chan-
ges.
divisor clocks per note note length
1 96 1/96th
3 32 1/32nd
6 16 1/16th
12 8 1/8th
24 4 1/4
0
Config Menu 2 Clock
+12 V ....
0 V ..
+12 V .
0 V ...