Doepfer A-100(~ 40 MB) - Manual (Page 400)

A-141 VCADSR System A - 100 doepfer
4
5 CV A ... 8 CV R
Attenuators 5 to 8 set the level of voltage control
for inputs ! to $.
9 LED
The LED indicates the level of the envelope’s voltage.
4. In- / Outputs
! CV A ... $ CV R
CV inputs ! to $ are where the voltages you want to
use to control the envelope parameters are patched.
% Gate
Socket % is the VCADSR’s gate input.
& Retrig.
Socket & is the VCADSR's retrigger input. This is
where you patch in a voltage to re-trigger the enve-
lope. If, for instance, you patch an LFO in, then while
the gate is open, the envelope is re-triggered every
time an LFO pulse is received (see Fig. 2).
Fig. 2: Envelope re-triggering
/ Output
Output socket / is where the envelope determined
by the A, D, S, and R parameters is available, every
time the VCADSR is triggered (see Fig. 1).
Output
Gate
Retrig.