Doepfer A-100(~ 40 MB) - Manual (Page 403)

doepfer System A - 100 Voltage Contr. Decay / Gate A-142
1
1. Introduction
Module A-142 (VCD) is a dedicated envelope gene-
rator with just one parameter, decay time. This decay
time is either controlled manually or by voltage con-
trol.
Whenever a trigger arrives at the VCD's trigger input,
an envelope is generated. This can then be used to
control VCO, VCF and VCA modules, or any other
module, come to that.
In addition to this, the module produces a gate signal
of adjustable length, which can be output in inverted as
well as normal polarity.
Two LEDs act as indicators of the envelope and gate
signals.
A-142
Volt. Contr. Decay/Gate
Trig. In
Inverse
Gate Out
Threshold
Decay
Gate Out
Env. Out
CV
CV