Doepfer A-100(~ 40 MB) - Manual (Page 545)

doepfer System A - 100 Dual Trigger Delay A-162
3
3. Controls and indicators
1 Del.
This control sets the trigger delay time t
D
(see Fig. 1)
in a range from zero to ten seconds.
2 Len.
This control 2 sets the length t
L
of the trigger pulse
(see Fig. 1) in a range from zero to ten seconds.
3 LED
LED 3 lights when a trigger pulse is being output.
4. In / Outputs
! In
Socket ! is the A-162’s input. This is where you
patch the trigger pulse in whose rising edge will start
the process.
" Out
The delayed trigger signal is output here.
Fig. 1: How the A-162 delays and lengthens a pulse
In
Out
t
D
t
L