Doepfer A-100(~ 40 MB) - Manual (Page 675)

doepfer System A - 100 MIDI-CV/SYNC interface A-190
21
Parameter Value Notes
CHANNEL 0 MIDI channel 1
REF. NOTE 36 C3
CLOCK TIME 1 clock frequency at output § = MIDI clock frequency

CLOCK POLARITY 0 positive:
RETRIGGER 0 legato - ie. no retrigger
LFO FREQ. c. 3 Hz
GLIDE TIME 0 no portamento
BEND WIDTH 12 1 octave
ASSIGN CV2 0 velocity
ASSIGN MODE 0 highest note
SCALE about ~1V/octave (not exactly! The 1V/oct scaling has to be
re-adjusted after an initialisation !)
REF. OFFSET 0 V
GATE POLARITY 0 positive:
RTRIG. TIME 4 4 milliseconds
CV CHAR. 0 1 V / octave
+12 V ....
0 V ..
+12 V ....
0 V ..