Module overview system a - 100, Doepfer – Doepfer A-100(~ 40 MB) User Manual
Page 34
8. Module Overview
System A - 100
doepfer
28
Module Width
Curr.
Curr.@5V
Description
A-180-1
4
-
-
Multiples 4HP
8-fold multi connector (may be splitted into two 4-fold multi connectors)
A-180-2
2
-
-
Multiples 2HP
8-fold multi connector (may be splitted into two 4-fold multi connectors)
A-181
4
-
-
Multiples 2
two multiples with 3.5 mm and 1/4“ mono and stereo sockets
A-182
6
-
-
Switched Multiple
eight sockets that can be switched to one of two busses or turned off
A-185-1
4
30
-
Bus Access Module
module for access to bus signals CV and gate
A-185-2
6
10
-
Precision Adder / Bus Access
high precision CV adder (0,1%) with 4 inputs and optional access to bus CV
A-186
4
-
-
Gate / Trigger Combiner
7 inputs that are "OR-wired" to the output, mainly for combination of gate/trigger signals
A-187-1
18
200
-
Digital Effects Module
DSP effects module with 4 voltage controller parameters
A-188-1
14
80
-
BBD Module
BBD module available with 6 different BBD types (128/256/512/1024/2048/4096 steps)
A-188-2
30
120
-
Tapped BBD Module
BBD module with 6 taps, single outputs and two (stereo) submixers
A-189-1
8
50
-
VC Bit Modifier
Bit modifier with 16 different algorithms (incl. But Crunching)
A-190-1
10
10
•
/ 50
MIDI-CV/SYNC-Interface
(module no longer available)
MIDI-to-CV and sync interface
A-190-2
6
50
-
MIDI-CV/Gate-Interface
MIDI-to-CV and gate interface, 4 CV outputs, Glide Control for CV1
A-190-3
6
60
-
MIDI/USB-CV/Gate-Interface
MIDI/USB-to-CV and gate interface, 4 CV outputs, Glide Control for CV1