Doepfer A-100(~ 40 MB) - Manual (Page 601)

doepfer System A - 100 Control Voltage Source A-176
3
3. Controls
1 CV 1 • 3 CV 2
Controls 1 and 3 provide coarse adjustment of the
voltages at outputs ! and ", and § and $ respecti-
vely.
The range of controls 1 and 3 is approximately 5 V.
2 Fine • 4 Fine
Controls 2 and 4 provide precision adjustment of
control voltages CV 1 (at outputs ! and ") and CV 2
(at outputs § and $) respectively.
The range of controls 2 and 4 is approximately 0.1 V.
5 CV 3
This knob sets the control voltage CV 3, at output %.
The range of this control is approximately 5 V.
4. Outputs
! CV 1 • " CV 1
These are the internally connected parallel outputs
for the first CV source, whose level is set by controls
1
and 2.
§ CV 2 • $ CV 2
These are the internally connected parallel outputs
for the second CV source, whose level is set by
controls 3 and 4.
% CV 3
This is the output for the third CV source, whose
level is set by control 5.
H The voltage range for each of the sources
is individually adjustable with jumpers on the
circuit board, either to 0 V - 5 V or symmetri-
cal around zero (-2.5 V to +2.5 V).