Doepfer A-100(~ 40 MB) - Manual (Page 676)

A-190 MIDI-CV/SYNC interface System A - 100 doepfer
22
Controller Effect Setting
Cont 01 n Modulation n = LFO voltage amount sent to CV 1
Cont 05 n Glide Time Portam. Time = n x 20 ms
Cont 64 n Sustain n = 0 to 63 : Off n > 63 : On
Cont 65 n Glide n = 0 to 63 : Off n > 63 : On
Cont 68 n Retrigger n = 0 to 63 : Off n > 63 : On
Cont 92 n LFO Freq. n = LFO frequency (CV 1)
Cont 121 n
All Cont. Off n can be any number.
LFO modulation amount = 0, Glide off
Cont 123 n
All Notes Off n canbe any number.
All notes off, GATE off
MIDI controllers in PERFORMANCE mode
No. Parameter Setting Default
CHANNEL NOTE ON ch n vel 1
REF. NOTE NOTE ON ch n vel C3
1
GATE POL.
pos.: PROG CHG 1
neg.: PROG CHG 2
pos.
CV CHAR.
V / octave: PROG CHG 3
Hz / V : PROG CHG 4
V / Okt
RETRIGGER
OFF: PROG CHG 5
ON: PROG CHG 6
OFF
CLOCK TIME PROG CHG n n = Divisor 1
2 CLOCK POL. pos.: PROG CHG 65
neg.: PROG CHG 66
pos.
3 REF. OFFSET m INC / DEC 0 V
4 SCALE m INC / DEC 1.00
5 RETRIG. TIME PROG CHG n
RETRIG.TIME = n x 1 ms
4 ms
6 ASSIGN CV 2
m M
0 Velocity (NOTE ON/OFF)
1 Program Change
2 Controller #n
3 Pitch Bend
4 Channel Aftertouch
5 Polyphonic Aftertouch
choice of MIDI controllers
Velocity
CONFIG menu
No. Parameter Setting Default
1 CHANNEL m INC / DEC 1
2 LFO FREQ. m INC / DEC ~ 3 Hz
3 GLIDE TIME PROG CHG n TIME= n x 20 ms 0 V
4 ASSIGN
MODE
Last Note: PROG CHG 1
Highest Note: PROG CHG 2
Highest
5 ARPEG. no function at present -
6 BEND WIDTH Reference note: first NOTE ON
Range note: second
NOTE ON
1 Octave
PERFORMANCE menu