Doepfer A-100(~ 40 MB) - Manual (Page 451)

doepfer System A - 100 Dual S&H A-148
1
1. Introduction
Module A-148 (Dual S&H) has two identical sample &
hold modules, designed to produce ‘staircase’ volta-
ges.
The signal present at the sample input (voltage range
-8V...+8V) is sampled at a rate set by the signal at the
trigger input, and held at that voltage at the S&H
output.
The exact shape of the staircase depends on the sort
of waveform at the sample input: NOISE or RANDOM
signals produce random patterns; an LFO produces
rising or falling staircase patterns.
Two LEDs for each S&H indicate the voltage (positive
or negative) of the sampled signal.
Trig. In
Smp. In
S&H Out
Control
Trig. In
Smp. In
S&H Out
A-148
DUAL S&H
Control