Set up in flitedeck, Colors tab – Jeppesen FliteDeck 3 User Manual
Page 79
JeppView FliteDeck User's Guide
82
7. After verifying the connection in HyperTerminal, click File > Exit. Click Yes
when asked if you want to disconnect now.
Set Up in FliteDeck
1. Open the FliteDeck Setup Program.
2. In the GPS tab, select GPS Connected.
3. Select Generic, and then select NMEA 0183 RMC. If this selection does not
work, try the Garmin GPS NMEA 0183. Jeppesen also has reports that the
Lowrance Airmap and others work when used with a Holux Bluetooth GPS.
4. Select the COM port and the BAUD rate.
5. Click Test COM and Baud.
6. After FliteDeck has successfully connected to the Bluetooth GPS, close the
FliteDeck Setup program and launch FliteDeck.
If you are still unable to connect with the Bluetooth GPS, contact a
Technical Support Representative
Colors Tab
Adjust screen colors and set function key labels in the Colors tab.