Jeppesen FliteDeck 3 - Manual (Page 139)

JeppView FliteDeck User's Guide
142
Deleting a Route
To delete a route:
1. Click the Plan tab.
2. Click Routes.
3. In the Select Route list, select the route to be deleted.
4. Click Delete Route (F10).
IMPORTANT
FliteDeck does not ask you to confirm this deletion unless it is the
active route used in FliteDeck.
When you exit FliteDeck, Windows asks you to save or reject this change to the
RoutePack file.
Reversing a Route
To reverse a route:
1. Go to the Plan tab.
2. Select Routes.
3. In the Select Route list, select the route to be reversed.
4. Click Reverse Route (F11).
This creates a new, reversed route in a RoutePack labeled with the current date. The
original route is retained.
Adding SIDs and STARs to a Route
You can add pilot-nav SIDs and STARs to your FliteDeck route after entering a route
with a departure and destination. A pilot-nav SID, as opposed to a vector SID, is one
that has specific routes as part of the procedure. The SID/STAR menu is active only
when pilot-nav SIDs or STARs are available for the departure or arrival airports of
the active route.
NOTE
When selecting a procedure, verify with your terminal charts that the
procedure is still valid and has not been replaced or modified.
Navigational data is updated every 28 days and changes within the
associated 28 days may not occur until the next cycle.
To add a SID or a STAR:
1. Select the Plan page.
2. Loaded a route in which the departure or arrival airports have SIDs or STARs
available.
3. Click SID/STAR (F11).