Jeppesen FliteDeck 3 - Manual (Page 128)

Plan Page
131
Appending Waypoints
To add a waypoint to the end of your route:
1. Click Clear Waypoint (ESC) to clear any text from the Enter Waypoint text
box.
2. Select the waypoint from the chart or type it in the Enter Waypoint text
box.
3. Click Append Waypoint (F9).
4. Click Execute (F7) to confirm your change or Cancel (ESC) to abandon it.
Inserting a Waypoint into your Route More Than Once
Use this procedure if you plan to overfly a given waypoint more than once. To insert
a waypoint into your route more than once:
1. Click Clear Waypoint (ESC) to clear any text from the Enter Waypoint text
box.
2. Click an existing waypoint in the Route Waypoint list. FliteDeck marks this
waypoint with an asterisk (*).
3. Click Insert Waypoint (F8) or Append Waypoint (F9).
4. If inserting, click the Move Up (F8) or Move Down (F9) to place the
waypoint where you want it in your route.
5. Click Execute (F7) to confirm your change, or Cancel (ESC) to abandon it.
Rubberband Editing
If your computer has a pointing device and you have enabled rubber-band editing in
the FliteDeck Setup you can use this powerful, easy way to edit your route on the
chart.
1. Drag or bend the route over a new waypoint:
• To insert a new waypoint into the route, point to the route line the
middle of the segment near the new waypoint, press the mouse
button, and bend the route line over the new waypoint.
• To move the route line from one waypoint to another, point to
the route line where it crosses the waypoint to be changed, and drag
the route line off that waypoint and on top of the new waypoint.