Jeppesen FliteDeck 3 - Manual (Page 112)

Plan Page
115
The Airport Information is organized in four sections: General, Communication
Frequencies, Runway/ Navigation Frequencies, and Weather. To view any of the
information, click on the labeled button.
• General information contains airport information about location, latitude and
longitude coordinates, elevation, time zone, fuel types and services. For US
airports, it also displays what paper sectional the airport resides on. If an
active XM weather connection is available (see
Weather ), there is also textual
information about any nearby Temporary Flight Restrictions (TFRs).
• Comm Freqs displays communication frequencies for the selected airport.
• Runway Nav Freqs displays runway information including size, surface
conditions, touchdown zone elevation (TDZE), localizer ID, frequency and
bearing. This page also displays nearby navigational aids.
• Weather accesses information from an XM receiver and displays METARS,
Terminal Area Forecasts, and City Forecasts.
To move up and down the pages:
• Click/tap on the provided up and down arrow keys.
• Use the UP and DOWN ARROW keys on the keyboard. Holding the arrow keys
down scrolls the information faster.
• Use the +/- keys to change font size within a tab.
Click Cancel to exit the Airport Information page.
Working with Routes
The purpose of the Plan page is to load, create, edit, and import routes.
View the following information to help create and manage your routes:
• Creating a New Route
• Working with Waypoints
• Loading a Previously-Saved Route
• Setting the Altitude Along the Route
• Setting the Active Waypoint
• Suspending Waypoint Sequencing
• Saving a Route
• Deleting a Route
• Reversing a Route
• Adding SIDs and STARs to a Route
• Deleting a SID or STAR
Creating a New Route