Jeppesen FliteDeck 3 User Manual
Page 35
JeppView FliteDeck User's Guide
38
To install program updates to JeppView and FliteDeck, Jeppesen aeronautical data,
and text data, follow these steps:
1. Insert ECD Disc 2 into the CD-ROM drive. If the setup program does not start
automatically, click Start > Run. Type d:\setup.exe (where d: is the letter
of the CD-ROM drive).
2. Review the installation summary, and then click Next.
3. Select the following check boxes and click Next:
• View the readme file — to read new information regarding the latest
program update.
• Install Jeppesen Weather Service — This option launches the
Jeppesen Weather Service installer, so that FliteDeck can display
weather using your XM WX Satellite Weather™ service. The Jeppesen
Weather Service option only appears if you are installing FliteDeck and
you have not previously installed the Jeppesen Weather Services. For
additional information about configuring and using your XM WX
Satellite Weather service in FliteDeck, refer to
Installation and Configuration
.
4. Follow the prompts on the remaining installation windows.
NOTE
See
for information on updating your data
electronically after the initial installation. Depending on the expiration
date of the data on the CDs, you may need to update your data soon
after installing JeppView.
Activating JeppView/JeppView FliteDeck for New Users
When a new JeppView/JeppView FliteDeck installation is complete, you must activate
the program within 30 days, or the software will stop operating. Because you may
need to use FliteDeck on a notebook computer in addition to your desktop computer,
your license agreement permits this, as long as you are the only person using the
program. Therefore, you can activate the software on an additional computer.
• To purchase site keys for additional computers or users, please contact
• If you have any problems activating your program, please contact
To activate JeppView and JeppView FliteDeck:
1. Start JeppView or FliteDeck by doing one of the following:
o
Click the JeppView or FliteDeck icon on the Windows desktop.
o
Click Start > Programs > Jeppesen > JeppView3 > JeppView3.
o
Click Start > Programs > Jeppesen > JeppView FliteDeck3 >
FliteDeck3.