Jeppesen FliteDeck 3 - Manual (Page 33)

JeppView FliteDeck User's Guide
36
These instructions cover the installation of JeppView 3 when using an imaging
process, such as Symantec Norton Ghost and Acronis True Image, to deploy the
application on additional computers.
What You Need
The following resources are needed in order to image a workstation and deploy the
image with JeppView on other workstations:
• Imaging software such as Symantec™ Norton Ghost™ and Acronis True
Image™.
• JeppView3 Program CD.
• Electronic Chart Data (ECD) Disc 1.
• Electronic Chart Data (ECD) Disc 2.
Creating a Master Image
To create the master image of JeppView and FliteDeck, install the program CD only.
After the master is installed to other workstations, you can continue with completing
installation of the system with the instructions that follow this section.
1. Insert the Program CD into your computer CD-ROM drive. The Installation
Wizard appears. (If it doesn’t, browse to your computer CD-ROM drive and
double-click setup.exe.)
2. On the Welcome screen, click Next.
3. Read the information in the Installation Overview window and click Next.
4. Read the license agreement and accept the terms, and then click Next.
5. In the Pilot Information dialog box, enter at least your name and the 16-
character alphanumeric JeppView serial number, and then click Next.
6. Select whether to install JeppView, FliteDeck, or both, and then click Next.
7. Select the path to install JeppView and click Next. Jeppesen recommends
that you use the default folder or a location where other Jeppesen programs
have been installed. If you use a different drive or folder, click Change, and
then type the path or browse to the folder.
8. Follow the remaining on-screen installation instructions to finish the program
installation. When the installation is complete, click Finish.
9. Click Close Window when the dialog box appears that instructs you to insert
the ECD Disc 1. Do not insert ECD Disc 1. The ECD data is installed on all
target machines after the image has been transferred to each workstation. If
your computer requires a reboot, do so before beginning the next procedure.
10. After you have finished installing the program CD, image the workstation
using an imaging software (for example, Symantec Norton Ghost or Acronis
True Image).
11. Deploy the master image to individual target workstations.