Jeppesen FliteDeck 3 - Manual (Page 133)

JeppView FliteDeck User's Guide
136
• The first line is the name of the RoutePack that contains the route. In
this example, The first route displayed is in the RoutePack name New
Trip.
• The second line contains the route name and total distance. The New
Trip RoutePack contains two routes: KBJC -> KPUB and Alternate 1.
• The bottom right corner indicates an active or unsaved route.
NOTE
When you save a route in FliteDeck, the naming convention is
"DailyYYMMDD", YY=last two digits of the year, MM=the month, and DD
the day that the RoutePack was created. You cannot add routes to a
RoutePack created on a previous day. You cannot rename RoutePacks
within FliteDeck; use JeppView or FliteStar.
2. Select the route you want by doing one of the following:
• Click the desired route to highlight it and then click Select.
• Click the desired route to highlight it and then click it again.
• Press the FUNCTION key to highlight it and press it again or press
ENTER.
• Use the ARROW keys to highlight the desired route and then press
ENTER.
NOTE Pressing ENTER, F7, or clicking Select confirms the route selection.