Metrohm Vision Manual - Manual (Page 90)

88 ▪▪▪▪▪▪▪
3.14.2 Automatic Archiving
The setup of automatic archival of an Output
Project is done in the Operations Method.
From the Data Acquisition mode, click on
Mode/Routine Analysis/Define Operations
Method.
Select an existing Operations Method or
create a new one. The Edit Operations
Method window appears.
Click on Output Setup. This will display the
following dialog:
Select XML Archive File to enable archiving
of the output projects (if the path to the
DTD file has not been defined yet, Vision will
prompt you to find it).
Click on OK.
Back in the Edit Operations Method dialog,
click on Enable Archive to setup the
scheduler for automatic archiving.
Click Archive Configuration to setup the
archiving scheduler:
3.15 One-click Analysis of Stored Data
Stored data can be easily and quickly analyzed from the Data Acquisition mode.
• Open project with spectra to be analyzed and select desired spectra or the entire product.
From the main menu select Edit/Run Routine Analysis. The following window opens: