Metrohm Vision Manual - Manual (Page 197)

▪▪▪▪▪▪▪ 195
7.3.5 Changing a Password
Each Vision user can change his/her own password regardless of the security access level. The
knowledge of the old password is required to change it. To change a password follow these steps:
1. If necessary, enter the DA mode.
2. Click on Configure/Password.
3. In the Change Password dialog box type in the old password, the new password, and the
confirmation.
4. Click on OK when done.
7.4 Log-out Interval
If Vision is not operated for a given period of time, you will have to re-enter the password to
continue operation. If instead of entering a password, a Cancel button is clicked on, Vision will close
all active projects and libraries and log-out from the current user.
The default log-out interval is 15 minutes. This time can be changed to any value. If you want to
disable this function, define the log-out interval value of 0.
To change the log-out interval value follow these steps:
1. Enter the Data Acquisition mode.
2. Click on Configure/Configuration.
3. In the Edit Configuration window, click on the Logout Interval tab.