Metrohm Vision Manual - Manual (Page 154)

152 ▪▪▪▪▪▪▪
• MUXRSLT2.XLS - used with multiplexer for two constituents
• MUXRSLT6.XLS - used with multiplexer for six constituents
• RESULTS2.XLS – used for 2 constituents (single point system)
• RESULTS6.XLS – used for 6 constituents (single point system)
• RESULT20.XLS– used for 20 constituents (single point system)
• RESCOMM.XLS – displays sample comment in the prediction table
• RESHORT – does not include Details page
For number of constituents not listed above, use a report with the number of constituent higher than
required. The list box displays also templates used for reporting diagnostics results.
Acquisition Setup Field
Acquisition Setup field configures the acquisition parameters:
1. For process systems, click on Timer button to program the data acquisition timer for
continuous or non-continuous data collection.
2. For laboratory systems use only the parameters available for Reference collection. Do not
select the Timed Acquisition option.
3. Choose Data Collection Method from the drop-down list in the DCM field. Only DCMs
consistent with the standardization type chose for the Operations Method are displayed.
External Reference Field
1. If a stored reference exists in the project, you can select it after checking the Use Stored
Reference check box.