Metrohm Vision Manual - Manual (Page 179)

▪▪▪▪▪▪▪ 177
• Trend Chart – displays predicted results vs. time chart. The chart has to be configured in
Quant Setup.
• ID Trend – displays the trend chart of predicted ID values.
• Running Average – displays the control chart with running average. The chart has to be
configured in Quant Setup.
• Running Residual Standard Deviation – displays the control chart with residual standard
deviation. The chart has to be configured in Quant Setup.
• Grand Average – displays the control chart with grand average. The chart has to be
configured in Quant Setup.
• Grand Standard Deviation – displays the control chart with grand standard deviation. The
chart has to be configured in Quant Setup.
• Grand Residual Standard Deviation - displays the control chart with grand residual standard
deviation. The chart has to be configured in Quant Setup.
• Combined X Chart – displays single average differences control chart for all constituents in the
selected product. The chart has to be configured in Quant Setup.
• Combined Trend Chart - displays single results vs. time chart for all constituents in the
selected product. The chart has to be configured in Quant Setup.
• Evolving Factors – displays Evolving Factors plot. The plot has to be configured from
Operations Method setup window.
• Block Average - displays the control chart with averages calculated on blocks of results. The
chart has to be configured in Quant Setup.
• Block RSD - displays the control chart with Residual Standard Deviation calculated on blocks
of results. The chart has to be configured in Quant Setup.
• Qual Trend - displays the trend chart of predicted Qual values.
• Combined Block RSD - displays the control chart with Residual Standard Deviation calculated
on blocks of results for all constituents in the selected product. The chart has to be configured
in Quant Setup.
24. Click on Next button to advance to the next screen.