Metrohm Vision Manual - Manual (Page 198)

196 ▪▪▪▪▪▪▪
4. Type in the desired value and click on OK.
Only a System Manager can configure log-out interval.
If the log-out time expires when data acquisition timer is running, Vision will continue spectral
acquisition. The acquired spectra will be saved in the normal way, although a window prompting you
to re-enter the password will show up.
7.5 Lock Function
Lock function temporarily disables Vision and could be used instead of logout when the operator
leaves workstation for short time. The program can not be accessed until a password is re-entered.
To use, click on File/Lock Vision or press CTRL+ALT+L from any place in Vision. The screen below will
be displayed. Enter valid password to resume operation.
Note: Locking Vision will not stop performance test, data acquisition, or Routine Analysis in progress.