Metrohm Vision Manual - Manual (Page 126)

124 ▪▪▪▪▪▪▪
5.2.3 Sample Selection Procedure
Preparation
1. Enter Sample Selection by choosing Mode/Quantitative Analysis/Sample Selection from the
main menu. The last active project is opened and displayed in the left window of the Sample
Selection screen.
2. If you want to work with a different project, click on File/Project/Open from the main menu
(make sure that the left window is in focus).
The Open Project window opens.
3. You can preview spectra from a product by expending the product and selecting spectra for
display. To view a sample spectrum, click on the sample name. Click on the sample again to
deselect it. You can display multiple samples from various products by simply clicking on them
in turn. To display a range of sample spectra from a product, click on the first spectrum in the
range, and then holding down the Shift key click on the last spectrum. To clear the spectral
display, click on Edit/Unselect All.
Creating equations and temporary sets
1. Select product from the project folder by clicking on Select/Select Product from the menu and
choosing the product from the drop-down list.