Metrohm Vision Manual - Manual (Page 169)

▪▪▪▪▪▪▪ 167
7. Click on Output Project button to create a new output project or attach an exiting one to the
Operation Method
If the analysis results are to be archived, check the Enable Archive box. The Archive
Configuration button becomes active. Click on it to configure the archiving frequency.
By default he results are archived to C:\Vision. You can change this location by clicking on Set
Archive Directory button.
8. Click on Next button to advance to the next screen.
The Select Reference Screen opens. This screen allows selecting stored or external reference
to be used in routine analysis. Please note that Use Stored Reference button is inactive when
no stored reference is saved.
9. Click on Next button to advance to the next screen.