Metrohm Vision Manual - Manual (Page 165)

▪▪▪▪▪▪▪ 163
2. Select the block size and spectral pretreatment. Select the Mean Center check box if the
spectra need to be mean-centered before PC calculation. Click on OK.
3. Select wavelength ranges, configure pretreatment, and click on OK.
4. From Configure Views options, select Evolving Factors view.
5. Run Routine Analysis.
6.2.3 Operations Method Wizard
An alternative method of configuring an Operation Method is to use the Operation Method Wizard.
The wizard leads the user through a series of setup screens. All options available in standard setup
are accessible through the wizard. For simple Operation Methods most wizard screens can be
skipped by just clicking on Next button and advancing to the next screen.
Please refer to the Operation Method Setup section for detailed description of individual options.