Metrohm Vision Manual - Manual (Page 29)

▪▪▪▪▪▪▪ 27
3.3.7 Changing the Data Collection Method
In order to change the DCM, click on Acquire/DCM and select the DCM.
You can also create a new DCM at this point. Once a spectrum has been saved using an existing
DCM, the DCM cannot be changed.
3.3.8 Lamp Status Management
When closing a Project or exiting Vision when connected to the analyzer, the program can turn the
instrument lamp off, leave it on, or ask the user. To configure this option, click on
Configure/Configuration from Data Acquisition mode.
Select the Logout Interval/Lamp Life tab on the dialog. Select desired option, either “Ask”, “Off” or
“On”. The default is “Ask”, which means that Vision will ask whether the lamp is to be turn off upon
each exit.
This is the Vision dialog box: