Rockwell Automation 7000L PowerFlex Medium Voltage AC Drive (C Frame) - Classic Control - Manual (Page 226)

Commissioning 4-21
7000 “C” Frame 7000L-UM300I-EN-P – Juen 2013
Service Data
This section of the commissioning chapter has been included in this
manual so that all of the system nameplate data and variable set
points can be captured as commissioned.
Why this Information is Needed
When a PowerFlex “C” Frame medium voltage AC drive is
commissioned, the start-up sometimes occurs in an artificial
environment. There‟s usually no actual process being performed,
and no load, at least not a full load. Therefore, the application
situation is artificial and this isn‟t an ideal time to establish
parameter baselines to signature the drive. After commissioning is
complete, the drive is at full capacity and realistic load conditions
occur; parameters such as speed regulation may begin to drift and
the drive will not perform as designed to meet processing
requirements.
It is important that the information required on the following pages is
completed in a detailed and accurate manner and that immediately
after their completion, the following data sheets are submitted to the
customer and to the factory. They will be required to perform
modifications on the drive line-up once production commences.
It is common for modifications to be made to the drive‟s program
some time during the two-month period following the drive
commissioning. This is done to ensure that speed control, direction,
starting and stopping functions are all performing with precision.
In addition to system modifications, the factory will use the data
sheet as an indication that the system is running. The date on the
commissioning data sheets will indicate to the factory the date that
the system has been started and will be used to commence the
product warranty.
In the unlikely event the system is not operating as designed, it will
be possible to trend performance between similar applications and
topologies. In the event a product notification or recall is required,
the datasheets will be used to identify if the customer falls under the
definition for an update.
These data sheets will be archived at the factory for future reference.