Rockwell Automation 7000L PowerFlex Medium Voltage AC Drive (C Frame) - Classic Control - Manual (Page 151)

Operator Interface 3-29
7000 “C” Frame 7000L-UM300I-EN-P – June 2013
The screen shown in Figure 3.32 is accessible from within a number
of screens where the Access Level affects the operation of
subsequent operations, such as:
1) [F10] key on the Top Level Menu,
2) [F8] key on the Modify Parameter screen,
3) [F8] key on the Setup Screen,
4) [F8] key on the Transfer Screen,
5) [F8] key on the Diagnostic Setup screen.
Figure 3.32 – Access Screen
The Current Access level is shown. To select a different access
level, use the up/down cursor keys to select the desired the level.
Then enter the password value (PIN) for that level using the data
entry keys. The value can be any number between 0 and 65535. As
the number is entered via the keys [0]-[9], the value will be shown
by a
placeholder ( i.e. * in the editing field), as shown in Figure 3.33 .
Figure 3.33 – Pin Entry
The value may be edited by using the [backspace] key. When the
value has been typed in, press the [enter] key. If the correct
PIN was
entered, the access level of the operator interface will change as
shown in Figure 3.34 . If the incorrect value was entered, the
operator interface will remain at the current access level.