Rockwell Automation 7000L PowerFlex Medium Voltage AC Drive (C Frame) - Classic Control - Manual (Page 146)

3-24 Operator Interface
7000L-UM300I-EN-P – June 2013 7000 “C” Frame
All tags which begin with that letter, and are appropriate for the
operation on which the selection is being performed, will be
displayed as in Figure 3.26. Using the [cursor up] or [cursor down]
keys, and if required the [F8] and [F9] keys to change the page,
select the desired tag. Press the [enter] key and the selected tag will
be used to continue the operation for which the selection process
was being used.
From either of these two screens (SELECT LETTER or SELECT
LIST) you can return directly to the default selection method via
groups by pressing the [F7] key.
Figure 3.25 – Selecting via a Letter (Step 1)
Figure 3.26 – Selecting Name via List (Step 2)
From the SELECT LETTER screen (Figure 3.25) the tag may also
be selected via a code by pressing the [F5] key.
Via Code
This method of selecting a tag is initiated from the SELECT
LETTER screen (Figure 3.25) by pressing the [F5] key. It allows
you to select the tag, given that you know the tag code associated
with the desired tag. Every parameter (i.e. tag) has a unique code
associated to identify it to devices incapable of making decisions
based on a name, such as a PLC for example.