Rockwell Automation 7000L PowerFlex Medium Voltage AC Drive (C Frame) - Classic Control - Manual (Page 142)

3-20 Operator Interface
7000L-UM300I-EN-P – June 2013 7000 “C” Frame
Viewing Revision Levels
For the purpose of maintenance or upgrading of software, the
revision levels of all the software contained in the terminal and the
drive may be viewed. To access this screen, press the [F9] key.
A screen typical of Figure 3.20 shows:
– the type of drive
– a 16-character , user definable string to uniquely identify a drive
– revision level of the terminal software and its part number
– revision level of the boot code contained in the terminal
– revision level of various boards contained in the drive.
These are identified by name.
Figure 3.20 – Utility Rev Level
To modify the user definable text string, press the [F8] key. (If
nothing happens then you have not gained the required access to
make changes. Exit to the Top Level Menu screen and refer to the
section entitled
Enter/Modify an Access Level .)
A screen typical of Figure 3.21 will be displayed. To modify the
text refer to the section entitled "Edit Text", noting the following
exception. When the text has been entered (as in Figure 3.22) the
enter key has no effect. Simply press the exit key [F10] to accept the
edited string.
Prior to exiting the screen, the string can be returned to its state upon
entry to the screen by pressing the [F7] key.