Lenze EDS4900U-REG - Manual (Page 31)

Technical Data
3-3
48XX/49XXSHB0399
3.2 General data / application conditions
Field Values
Type of protection IP20 to DIN 40050, steel sheet housing
Permissible humidity Relative humidity 90%, no condensation
Temperature ranges
Storage -25 •C...+ 55 •C
Transport -25 •C...+ 70 •C
Influence of the installation height h $ 1000m : 100%rated armature current
h $ 2000m : 95%rated armature current
h $ 3000m : 90%rated armature current
h $ 4000m : 85%rated armature current
Degree of pollution VDE 0110, part 2, degree of pollution 2
Controllers must not be exposed to a corrosive or explosive
atmo-sphere.
Noise emission Requirements to EN 50081-2, IEC 22G
Limit-value class A (EN 55011; industrial premises) with RFI filter
Noise immunity Limit values maintained with RFI filter.
Requirements to EN 50082-2, IEC 22G
Requirements
Standard Severity
ESD EN 61000-4-2 3, i.e. 8kV air discharge
6 kV contact discharge
RF interference IEC 1000-4-3 3, i.e. 10 V/m
(enclosure)
Burst
EN 61000-4-4 3/4, i.e. 2kV / 5kHz
Surge EN 61000-4-5 3, i.e. 1.2 / 50 ms
1kV phase - phase
2kV phase - PE
Show/Hide Bookmarks