Lenze ECSCMxxx - Manual (Page 327)

Appendix
Code table
12
l
327 EDBCSXM064 EN 11.0
IMPORTANT Possible settings Code
Selection Lenze/
{Appl.} Designation No.
C3160 ToggleErrReac 3 Toggle bit error handling ^ 136
0 TRIP
1 Message
2 Warning
3 Off
4 FAIL−QSP
C3161 ToggleErLimit 4 Toggle bit error counter limit ^ 136
0 {1 units} 65535
C3162 ToggleBitFail 0 Toggle bit error counter
Read only
0 {1 units} 65535
C3165 SyncInside
Win
0 CAN synchronisation inside the
window
Read only ^ 209
0 {1 bit} 1
C3170 NoHoming
Reac
3 Reaction, when the reference is
not known.
0 TRIP
1 Message
2 Warning
3 Off
4 FAIL−QSP
C3175 HW EndReac 4 Reaction, when a hardware limit
switch is activated. ^ 172
0 TRIP
1 Message
2 Warning
3 Off
4 FAIL−QSP
C3180 MonitorData 0 Monitor data selection
Read only
^ 133
0 {1 units} 7
C3181 MonitorData 0 Monitor data selection ^ 133
0 Free
1 MCTRL_nPos_a Actual position (16 bits) referred
to one revolution (rotor position)
2 DINT_TO_INT
(MCTRL_dnPosSet_p) Following error ±2 15
3 MCTRL_nNAct_a Actual speed (n
max
= 2 14 )
4 MCTRL_nMAct_a Actual torque (M
max
= 2 14 )
5 MCTRL_nIAct_a Actual motor current (I
max
= 2 14 )
6 MCTRL_nDCVolt_a Actual DC−bus voltage
(2
14 ¢ 1000 V)
7 PosLatchDiff Difference between actual
position and position at touch
probe (C6000)
C3200 Act.Fault 0 All fault indications
(TRIP, FAIL−QSP, warning, message) Current fault
Read only ^ 270