9300 servo plc, Appendix – Lenze DDS Target 9300 Servo PLC V8.x User Manual
Page 133
9300 Servo PLC
Appendix
3.6
Code table
3−127
L
9300 Servo PLC EN 5.1
Code
Information
Possible settings
LCD
Code
Information
Selection
Lenze
LCD
[C0089] Mot frequency
à
Rated motor frequency
à
Dependent on C0086
·
If C0086 is changed, the value is reset to the assigned
Lenze setting.
·
Change sets C0086 = 0.
10
{1 Hz}
1000
[C0090] Mot voltage
à
Rated motor voltage
à
Dependent on C0086
·
If C0086 is changed, the value is reset to the assigned
Lenze setting.
·
Change sets C0086 = 0.
50
{1 V}
500
[C0091] Mot cos phi
à
Motor cos
j
à
Dependent on C0086
·
If C0086 is changed, the value is reset to the assigned
Lenze setting.
·
Change sets C0086 = 0.
0.50
{0.01}
1.00
C0093 DRIVE ident
g
Controller identification
0
Def. power stage
1
No power stage
93xx
93xx
C0094 Password
0
Keypad password protection
·
Parameter password protection for the keypad.
·
When the password is activated, only user−menu codes
can be accessed.
·
For extended password protection, please see C0096.
0
{1}
9999
0 = No password protection
[C0095] Rotor pos adj
0
Rotor position adjustment of a synchronous motor
·
C0058 displays the zero phase of the rotor
·
C0095 = 1 starts position adjustment
0
Not active
1
Active
C0096 AIF/CAN prot.
AIF/CAN password protection
·
Extended password protection for bus systems when
password is activated (C0094).
·
All codes in the user menu can be accessed.
0
No password protection
1
Read protection
2
Write protection
3
Read/write protection
1
0
AIF password protection
2
0
CAN password protection
C0098 Zero pos offs
0
Setting the reference position of the feedback system
·
For position feedback (integrator output
MCTRL_dnPos_p of the motor control)
·
Only possible when the controller is inhibited.
·
Caution: This code returns an invalid value when it is
read.
−2147483647
{1 inc}
2147483647
C0099 S/W version
g
Software version of operating system
C0105 QSP Tif
0.000
Deceleration time for quick stop (QSP)
·
Referred to speed change n
max
(C0011) ... 0
0.000
{0.001 s}
999.900