Lenze DDS Target 9300 Servo PLC V8.x - Manual (Page 123)

9300 Servo PLC
Appendix
3−117
L
9300 Servo PLC EN 5.1
Fault reset
The current fault can be reset by a TRIP−RESET e.g. via C0043:
Code LCD Possible settings Info
Lenze Selection
C0043 Trip reset 0 TRIP reset
0 TRIP−RESET (current TRIP reset)
1 Error occurred (TRIP is active)
Deleting entries in the fault memory
The entries in the fault memory can be deleted via C0167.
·
This function can only be used if there is no active fault.
Code LCD Possible settings Info
Lenze Selection
C0167 Reset failmem 0 Reset fault memory
0 No function
1 Delete all entries in history buffer
Access to fault memory via Global Drive Control (GDC)
The fault memory of the PLC can also be displayed in the GDC.
·
Double−click on "Dialog diagnostics" in the GDC parameter menu to open the 9300
diagnostics dialog box:
History buffer
 ‚ ƒ
 No. of system error message and response (C0168/x)
‚ Time of occurrence (C0169/x)
ƒ Frequency of successive occurrence (C0170/x)
„ Reset of the fault (TRIP−RESET); only possible if there is no active fault.
„