Xerox WorkCentre PE120-120i-3124 - Manual (Page 82)

Printing Tasks 4.4
Printer Settings
You can use the Xerox WC PE120 Series printer properties
window, which allows you to access all of the printer options you
need when using your machine. When the printer properties are
displayed, you can review and change whatever settings are
needed for your print job.
The printer’s properties window may differ, depending on your
operating system. This User’s Guide shows the Printing
Preferences window for Windows XP.
Your printer’s Printing Preferences window consists of 6 tabs:
Layout, Paper, Image Options, Output Options,
Watermark, and About.
If you access printer properties through the Printers folder, you
can view additional Windows-based tabs (refer to your Windows
User’s Guide) and the Printer Configuration tab (see
page 4.13).
N OTES :
• Most Windows applications will override the settings you specify
in the printer driver. Change all of the print settings available in
the software application first, and change any remaining settings
using the printer driver.
• The settings you change remain in effect only while you are
using the current program. To make your changes permanent,
make them in the Printers folder. Follow this procedure:
1. Click the Windows Start menu.
2. For Windows 98/Me/NT 4.0/2000, select Settings and then
Printers.
For Windows XP, select Printers and Faxes.
3. Select the Xerox WC PE120 Series PCL 6 machine icon.
4. Click the right mouse button on the printer icon and:
• In Windows 98/Me, select Properties.
• In Windows 2000/XP, select Printing Preferences.
• In Windows NT 4.0, select Document Default.
5. Change the settings on each tab, and click OK.