Xerox WorkCentre PE120-120i-3124 - Manual (Page 146)

Faxing 7.20
4 Press Enter when the name appears correctly or without
entering a name.
5 To store more numbers, press a one-touch button and
repeat steps 2 through 4.
OR
To return to Standby mode, press Stop/Clear.
Sending a Fax using a One-touch Number
1 Load the document(s) face up into the ADF.
OR
Place a single document face down on the document glass.
For details about loading a document, see page 7.6.
2 Adjust the document resolution to suit your fax needs (see
page 7.9).
If you need to change the darkness, see page 7.3.
3 Press the one-touch button where you stored a number.
The document scans into memory.
4 The machine dials the fax number stored in the one-touch
dial location and the document is sent when the receiving
fax machine answers.