Xerox WorkCentre PE120-120i-3124 - Manual (Page 68)

Paper Handling 3.2
Selecting Print Materials
You can print on a variety of print materials, such as plain paper,
envelopes, labels, transparencies, and etc.. Always use print
materials that meet the guidelines for use with this machine.
See “Paper Specifications” on page E.6. To get the best possible
print quality, use only high-quality copier-grade paper.
When you choose print materials, consider the following:
• Size: You can use any size paper that fits easily within the
paper adjusters of the paper tray.
• Weight: Your machine supports paper weights as follows:
- 16 ~ 24 lb (60 ~ 90 g/m 2 ) bond for the standard paper tray
(Tray 1) and optional paper tray (Tray 2)
- 16 ~ 43 lb (60 ~ 163 g/m 2 ) bond for the Bypass tray
• Brightness: Some papers are whiter than others and produce
sharper, more vibrant images.
• Surface smoothness: The smoothness of the paper affects
how crisp the printing looks on the paper.
C AUTION : Using print materials that dose not conform to the
specifications listed on page E.4 may cause problems that may
require service. This service is not covered by the warranty or
service agreements.
Paper Type, Input Sources, and Capacities
Paper Type
Input Source/Capacity *
* Maximum capacity may differ depending on media weight, thickness, and
environmental conditions.
Tray 1 Optional
Tray 2
Bypass Tray
Plain paper 250 250 50
Envelopes - - 5
Labels **
**If you experience excessive jamming, load one sheet at a time through the
Bypass tray.
- - 5
Transparencies ** - - 5
Card stock ** - - 5