Xerox WorkCentre PE120-120i-3124 - Manual (Page 114)

Copying 5.10
Clone Copying
This special copy feature can be applied only when you place a
document on the document glass. If a document is detected in
the ADF, Clone copying feature does not work.
1 Place the document to be copied on the document glass,
and close the cover.
2 Press More Features.
3 Press More Features or the scroll button (W or X) until
“Clone” displays on the bottom line.
4 Press Enter to make your selection.
5 If necessary, customize the copy settings, including
number of copies, darkness, and original type, by using the
control panel buttons. See “Setting Copy Options” on
page 5.7.
N OTE : You cannot adjust the copy size using the Reduce/
Enlarge button while making a clone copy.
6 Press Start begin copying.
Collation Copying
This special copy feature is available only when you load
documents in the ADF.
1 Load the documents to be copied in the ADF.
2 Press More Features.
3 Press More Features or the scroll button (W or X) until
“Copy Collate” displays on the bottom line.
4 Press Enter to make your selection.
5 If necessary, customize the copy settings, including
number of copies, darkness, and original type, by using the
control panel buttons. See “Setting Copy Options” on
page 5.7.
6 Press Start to begin copying.
1 2
3
1 2
3